Accessories needed for the installation and maintenance of electric fences including testers, insulators, tape and braid, switches, underground cable and other accessories including earth kits and lightning diverters.
Offset Insulators 150mm Drive in Pigtail Offsets Pack of 10
Side drive wood post pigtail offset
Used for electrifying and protecting existing wooden posts
Can be used with wire, braid and tape
Install by hammering in and then staple the elbow to the post
UV stabilised for weather resistance and long life
High strength, durable spring steel..
Thunderbird offset electric fence insulators are UV stabilized plastic molded to long screw that sits 200mm out when screwed in.Also known as:standoff insulators
stand off insulators
off set insulator
stand away insulators..
Fibreglass tread in posts are lightweight and the perfect solution for both strip grazing and permanent grazing.The rods are 10mm diameter, and lightweight.They come in packs of 25, in a choice of 3 sizes.Springclips can also be attached to the posts to enable multiple heights of wire to be strung. This is shown in the photo but the clip is not included. Nylon caps help protect th..
If you have an electrified floodway or your fence crosses a river or creek, it may be a good idea to fit a flood controller.This is basically an energy limiter, and prevents the immersed section of the fence from shorting out the entire system when a flood occurs.It minimises voltage loss across floodways.Fit the controller in series with a couple of connector clamps...
Kit comprises of 1 x lightning choke spring
1 x porcelain arrestor
1 x end strain insulator
2 x wire joint clampsLightning coming in contact with the insulated live wire and travelling back towards the energiser—slows down due to the choke spring and allows the spike to dissipate through the arrestor to earth. Install the kit on the first run of fencing 30 metres away..