Heavy Duty 25mm x 5m Ratchet Tiedown Aerofast 1,000kg break strength Twin PackRatchet tie-downs. 5m long using 25mm-wide webbing with S-hooks.
Ideal for heavier trailer and light truck loads.
Rated at 1,000kg break-strength.
Available in a twin pack...
Single ratchet tie-down. 5m long using 25mm-wide webbing with S-hooks.Ideal for tying loads on the back of the ute or trailer loads.Rated at 500kg break-strength...
Ratchet tie-downs. 4m long using 25mm-wide webbing with S-hooks.Ideal for tying loads on the back of the ute or trailer loads.Rated at 500kg break-strength.Available in a twin pack and triple pack...
The Hansen Standard Male Adaptor allows you to convert the Hansen valve inlet to a size that matches your trough or tank. Compatible with all Hansen Superflo, Maxflo, Fastflo and Leveller Valves...
Hansen Full-Flow* ball valves can be used anywhere the flow of fluid needs to be quickly and directly stopped and started. All valves have BSPT threads.
*Hansen Full-Flow valves do not restrict pipe flow when fully open. Blue Handle is for general use...
The Fast Flo trough valve is ideally suited to tight-fitting environments. Supplied with one through-trough flange fitting, long flo at arm and 70cm float cord (with nuts). Recommended use of 115mm ball float (not supplied).
Length 10cm overall, fitted, including clearance for tethered ball. Use a ..
Mini compact design suited to confined spaces for automatic filling & maintaining water levels in small feeder bowls, troughs & header tanks
Cost effective trough/tank valve - 29 PSI - 9 l/min
Ability to attach a diffuser hose to reduce water turbulence & noise in top entry installations & Anti-..
The Fast Flo trough valve is ideally suited to tight-fitting environments.Supplied with one through-trough flange fitting, short float arm and 70cm float cord (with nuts). Recommended use of 115mm ball float (not supplied).Length 30cm overall, fitted, including attached ball. (Float cord is ..
Pack of 2 x 2 metre long, 25mm webbing camlock tie-downs with S hooks and special built in soft loop extension ends for looping over handle bars.Extra grab loop on strap end makes for easy tensioning. These tie-downs have been specially developed for motorcycle use. Each strap is rated to 600kg ..
Pack of 2 x 2 metre long, 37mm webbing camlock tie-downs with ultra safe karabina end hooks and special built in soft loop extension ends for looping over handle bars.
These tie-downs have been specially developed for motorcycle use. Each strap is rated to 700kg break strength...
The Philmac blue-handled ball valve has been servicing the Australian market for over 30 years.With a distinctive blue easy grip handle, the valve is recognised in the market as the industry standard, providing users with the confidence of a strong, reliable and robust product.Proudly made i..
Easily converted into a Non Return valve with the removal of the filter, the Philmac Foot Valve is the perfect choice for preventing back flow so pipelines do not drain and cause damage to high value equipment such as pumps.Philmac foot valves have been successfully servicing the Australian mark..
Philmac 25mm Inline cartridge filter stops the dirt and grit from dirty water entering the irrigation system and blocking drippers and sprays.It can be secured with 25mm locking clamps, requires simple maintenance and can be situated anywhere on line, ideally before drippers...
The end plug will seal off the end of 25mm polytube and can be removed at a later time if you wish to extend the line.Secure with CT29 tube clips.Philmac static fittings have been designed to suit Low Density Polyethylene (LDPE) pipe with an expected maximum pressure of 300 kPa. The metric s..
Philmac non-return valves have been successfully servicing the Australian market for more than 20 years with a reputation for quality and reliability. Designed to allow water to flow in only one direction to avoid loss of water, prevent backflow and ensure pipelines do not drain.The valves have ..
2 x 3m long roofrack straps using 25mm-wide webbing with camlock stopper.
Easy to pull up tight through the lock. Ideal for tying light loads on a roofrack.Rated at 300kg break-strength.Available in a twin pack...