Hydroponics / Aquaponics and Irrigation

Philmac19mm Inline cartridge filter stops the dirt and grit from dirty water entering the irrigation system and blocking drippers and sprays.It can be secured with 19mm locking clamps, requires simple maintenance and can be situated anywhere on line, ideally before drippers...

Philmac 25mm Inline cartridge filter stops the dirt and grit from dirty water entering the irrigation system and blocking drippers and sprays.It can be secured with 25mm locking clamps, requires simple maintenance and can be situated anywhere on line, ideally before drippers...

90 degree elbow fitting with a female thread at one end and a male thread at the other end...

Pack of 5 13mm joiners to join 13mm polytube.Best used with tube clips CT15..

Pack of 5 19mm joiners to join 19mm polytube.Best used with tube clips CT23..

Pack of 5 25mm joiners to join 25mm polytube.Best used with tube clips CT29..

Pack of 5 32mm elbows to join 32mm polytube.Best used with tube clips CT37..

Pack of 5 32mm joiners to join 32mm polytube.Best used with tube clips CT37..

Pack of 5 32mm tees to join 32mm polytube.Best used with tube clips CT37..

The end plug will seal off the end of 13mm polytube and can be removed at a later time if you wish to extend the line.Secure with CT15 tube clips.Philmac static fittings have been designed to suit Low Density Polyethylene (LDPE) pipe with an expected maximum pressure of 300 kPa. The metric s..

The end plug will seal off the end of 19mm polytube and can be removed at a later time if you wish to extend the line.Secure with CT23 tube clips.Philmac static fittings have been designed to suit Low Density Polyethylene (LDPE) pipe with an expected maximum pressure of 300 kPa. The metric s..

The end plug will seal off the end of 25mm polytube and can be removed at a later time if you wish to extend the line.Secure with CT29 tube clips.Philmac static fittings have been designed to suit Low Density Polyethylene (LDPE) pipe with an expected maximum pressure of 300 kPa. The metric s..

The end plug will seal off the end of 32mm polytube and can be removed at a later time if you wish to extend the line.Secure with CT37 tube clips.Philmac static fittings have been designed to suit Low Density Polyethylene (LDPE) pipe with an expected maximum pressure of 300 kPa. The metric s..

Umbrella type pattern 4mm inlet, 0-85 L/h @ 100 kPa adjustable via the knob on top..

Umbrella type pattern 4mm inlet, 0-85 L/h @ 100 kPa adjustable via the knob on topPack of 5..

Philmac non-return valves have been successfully servicing the Australian market for more than 20 years with a reputation for quality and reliability. Designed to allow water to flow in only one direction to avoid loss of water, prevent backflow and ensure pipelines do not drain.The valves have ..

Philmac non-return valves have been successfully servicing the Australian market for more than 20 years with a reputation for quality and reliability. Designed to allow water to flow in only one direction to avoid loss of water, prevent backflow and ensure pipelines do not drain.The valves have ..

Philmac non-return valves have been successfully servicing the Australian market for more than 20 years with a reputation for quality and reliability. Designed to allow water to flow in only one direction to avoid loss of water, prevent backflow and ensure pipelines do not drain.The valves have ..

Hose clamps should be used with all barbed irrigation fittings to stop the hose from coming off the fitting.Use these clamps with 13mm barb fittings.  Supplied in a pack of 10...

Hose clamps should be used with all barbed irrigation fittings to stop the hose from coming off the fitting.Use these clamps with 19mm barb fittings.  Supplied in a pack of 10...

Hose clamps should be used with all barbed irrigation fittings to stop the hose from coming off the fitting.Use these clamps with 25mm barb fittings.  Supplied in a pack of 10...

Hose clamps should be used with all barbed irrigation fittings to stop the hose from coming off the fitting.Use these clamps with 32mm barb fittings.  Supplied in a pack of 10...

The original patented Shrubbler with flow adjustment. Flow and coverage can be altered by rotating the cap.FeaturesFingertip flow control with shut-off option. Spike models anchor Shrubbler at the plant.ApplicationsPots, tubs, landscaped gardens and nurseries. Ideal for hangin..

The original patented Shrubbler with flow adjustment. Flow and coverage can be altered by rotating the cap.FeaturesFingertip flow control with shut-off option. Barb model for direct attachment to micro and supply tubes.ApplicationsPots, tubs, landscaped gardens and nurseries. ..

Suitable for sealing water pipe threads. WaterMark approved for use with potable water...

Durable and reliable with excellent distribution uniformity. Vari-Rotor Spray can be adjusted to alter flow and coverage.FeaturesC-Frame design for strength and high distribution uniformity. Full flow flipper suspended between two bearings for reliable performance. Inverted model inco..

The vari-jet drip spray assembly features a built-in vari-flow valve which adjusts the radius of throw and reduces flow. Ideal for home and landscaped gardens as well as adjusting overhead watering of plants in hanging baskets.180 degree spray pattern 0 – 77 litres/hour at 100kPa Threaded..

An adjustable flow, full circle vortex sprayer with fine water droplets. Flow and coverage can be altered by rotating the cap.FeaturesFingertip flow control with shut-off option. Spike model to anchor Spectrum™ at the plant.ApplicationsPots, tubs, ground cover, landscaped gard..